Ravak Sabina Shower Tray Waste Trap (10648)

Signature Features

Without a waste trap, no shower tray could fulfil its purpose and drain water away during showering. Because a shower tray is a built-in part of a bathroom, only choose drains that are made of the highest quality materials which will truly last.

RAVAK Basic, Standard and Professional shower tray waste traps have a diameter of 90 mm and a drainage flow rate of 30 litres per minute. This facilitates their use in shower enclosures with a hydromassage panel. All RAVAK shower tray waste traps can be cleaned from the outside, which is a prerequisite for their use with shower trays installed in a "fixed" manner. Standard and Professional waste traps differ in the type of material used for the waste trap cap. The Professional waste trap is equipped with a metal cap, while the Standard waste trap has a metal-plated plastic cap. The shower tray can be drained using the ClickClack system (pressing the waste trap stops drainage and pressing it again starts drainage).

• Diameter: 5.2 cm
• Cover cap: Chrome-plated metal
• 3 Year Warranty

Adequate drainage volume

RAVAK waste traps are able to drain a minimum of 30 litres of water per minute, which means they are able to handle a shower enclosure equipped with a hydromassage panel.

Easy to clean

Easy access and the ability to clean the waste trap are essential for your peace of mind and long-term confidence. You needn't live in fear that the waste trap will clog and you will be forced to find a plumber.

Special Note:

Water drainage is operated by the ClickClack system (the outflow is closed by pushing the waste plug and opened by pushing it a second time). The Sabina waste trap is only suitable for the deep Sabina shower trays.